ht
Ist Hyperthreading auf meiner Linux Box aktiviert?
Written by georg on Juni 28, 2008
Mit dem folgenden Befehl kann man ja jede Menge an Infos über die CPU auslesen:
# cat /proc/cpuinfo
Man sieht sehr schön, hier einen Zweikern Prozessor. Nur hat dieser auch wirklich Hyperthreading aktiviert? Das ht Flag verrät ja nur, ob Hyperthreading unterstützt wird.
processor : 0 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping : 3 cpu MHz : 1800.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 0 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 3584.67 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc processor : 1 vendor_id : AuthenticAMD cpu family : 15 model : 67 model name : AMD Athlon(tm) 64 X2 Dual Core Processor 5000+ stepping : 3 cpu MHz : 1800.000 cache size : 512 KB physical id : 0 siblings : 2 core id : 1 cpu cores : 2 fpu : yes fpu_exception : yes cpuid level : 1 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 ht syscall nx mmxext fxsr_opt rdtscp lm 3dnowext 3dnow pni cx16 lahf_lm cmp_legacy svm extapic cr8_legacy bogomips : 3584.67 TLB size : 1024 4K pages clflush size : 64 cache_alignment : 64 address sizes : 40 bits physical, 48 bits virtual power management: ts fid vid ttp tm stc
Die Lösung dieses Problemes fällt zumindest unter Novell/SuSE recht leicht:
# hwinfo --cpu 01: None 00.0: 10103 CPU [Created at cpu.301] Unique ID: rdCR.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.67.3 "AMD Athlon(tm) 64 X2 Dual Core Processor 5000+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy Clock: 1000 MHz BogoMips: 1991.48 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown 02: None 01.0: 10103 CPU [Created at cpu.301] Unique ID: wkFv.j8NaKXDZtZ6 Hardware Class: cpu Arch: X86-64 Vendor: "AuthenticAMD" Model: 15.67.3 "AMD Athlon(tm) 64 X2 Dual Core Processor 5000+" Features: fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2,ht,syscall,nx,mmxext,fxsr_opt,rdtscp,lm,3dnowext,3dnow,pni,cx16,lahf_lm,cmp_legacy,svm,extapic,cr8_legacy Clock: 1000 MHz BogoMips: 1991.48 Cache: 512 kb Units/Processor: 2 Config Status: cfg=new, avail=yes, need=no, active=unknown
An der Zeile Units/Processor: 2 erkennt man schön, dass jeder der beiden Kerne tatsächlich noch HT aktiviert hat!
Sollte jemand andere Möglichkeiten kennen, das zuverlässig heraus zu finden, bitte immer nur heraus damit!